KS from Samsung Semiconductor Division. Find the PDF Datasheet, Specifications and Distributor Information. ERMFB-1 is character module 8×1 lcd display datasheet,KS or equivalent controller,wide temperature and view angle,fstn lcd,blue backlight,5v power. KS datasheet, KS circuit, KS data sheet: SAMSUNG – 16COM / 40SEG DRIVER & CONTROLLER FOR DOT MATRIX LCD,alldatasheet.
|Published (Last):||20 November 2004|
|PDF File Size:||9.57 Mb|
|ePub File Size:||13.99 Mb|
|Price:||Free* [*Free Regsitration Required]|
Quick Links Categories Recent Discussions.
I’ve successfully gotten the Stamp to communicate with a similar 4×40 LCD that uses the more common Hitachi HD controller, but the same code does not apply. As “compatible” as they may be stated as being, there appears to be some differences.
My Research found a datasheet for the KS and it is in there that I learned that the initialization sequence is a bit different. But I am still failing to get anything but garbage to print on the display. The problem seems to be that it is not successfully getting the command to switch to 4 bit mode, the method that I am using for the other LCD as well. dattasheet
Any help with LCD driver KS/S6A? | Microchip
What I DO get is the screen to clear and a cursor in the upper ks006 corner. My suspicion is that because these commands are lower in value on the LSB side of a bytethat I’m only successful with them because the MSB nibble is getting chopped off. The controller appears datasheey still be looking for an 8 bit instruction instead of two 4 bit instructions. Determining the correct pinouts was another challenge as they were not stated as correct on the company’s website.
I’m thinking I wouldn’t be able to execute cursor movement commands if my data lines were incorrect.
I’ve had good success with serial LCDs, but cannot find them in 4×40 size. If the packages were smaller, I’d contemplate sitting two 4×20 side by fatasheet, but the circuit boards and bezels on the LCD keep the actual displays from lining up close to one another.
Interfacing to LCDs with Samsung KS0066 controller
I’d like to know if anyone has had success with this controller and what the trick dxtasheet. I seem to be getting real close to getting it to work, but need that extra piece of information that I’m not seeming to come up with as yet.
It powers up fine, I get the two dark lines on lines 1 and 3 and I have the contrast POT working fine. LCDOUT commands can produce results, but they are random characters, but consistent in each experiment. Comments 2 Comments sorted by Date Added Votes.
Display 40×2 LCD Module Character Datasheet PDF,KS0066,White on Blue
I figured this situation dattasheet with continued diligence. As it turns out, the initializing sequence difference between the Samsumg KS and the Hitachi HD was not the issue.
In fact the initialization sequence for the Hitachi works on the Samsung controller. What was completely different was the pinouts as compared with any documented 4×40 LCD I could find. Generally speaking, LCDs with fewer than 80 characters have the data pins starting at pin 1 and the LCDs with less than 80 characters have the power and ground connections starting at pin 1.
Character Module 8×1 LCD Display Datasheet,KS,Black on Blue
What helped was knowing that I had partial success and that getting control commands to work meant I was either sending partial commands or RS was not getting to the LCD. Add to that the fact that the second controller was not responding, I know I could have had up to three pin connections wrong.
As it turned out, Enable 2 was in the wrong position and all of the four data lines were shifted by one position. All is well that ends well. Sign In or Register to comment.